TENDER NO:12                       TRADE:AOCP/FITTER                            ITIANKLESHWAR
SR  NO:	ITEM NAME:	QTY	RATE	REMARK
1	FILE HANDLIES	192
2	PROTRACTER CELLULOID CEMICIRCULAR	1
3	SCALE (WOOLD) DRAUGHTSMEN 12"/30CM	27
4	SCRIBER 150 MM (KNURLED CENTER POSITION)	35
5	PUNCH CENTRE 4" / 100 MM LONG X 10 MM DIA -KNURLED BODY	3
6	SET SQUARE CELLULIOD 45 DEGREE -8 INCH	34
7	SCREW DRIVER 3" X 3/8" BLADE	49
8	RULE STEEL 30 CM GRADUATED BOTH ENGLISH AND METRIC UNITS	12
9	RULE STEEL 30 CM GRADUATED BOTH ENGLISH AND METRIC UNITS	102
10	SET SQUARE 60 DEGREE (250X1.5 M.M.) IS 1561	51
11	PUNCH PRICK 100 MM.	2
12	PUNCH PRICK 6" / 15 CM	39
13	SQUARE -T 24 INCH BLADE	52
14	CHISEL DIAMOND POINT 3/8" / 9 MM / 10 MM	3
15	CHISEL HALF ROUND 3/8"/ 9 MM /10 MM	65
16	CHISEL COLD CROSS 9 MM X 3 MM	47
17	CHISEL COLD FLAT 12 MM X 200 MM	6
18	MALLET HARD WOOD 0.50 KG.	7
19	CALIPER INSIDE SPRING 6" / 15 CM	7
20	CALIPER OUTSIDE SPRING 6" / 15 CM	12
21	GOGGLES PAIRS WELDERS 4" /10 CM	3
22	GOGGLES (FIBER OR PLASTIC CUP) SAFETY GLASSES (INTERCHANGEABLE CLEAR GLASSES).	35
23	FILE FLAT SMOOTH 150 MM	24
24	HAMMER HIDE FACED WITH HANDLE	4
25	GLOVES PAIR LEATHER	4
26	HACKSAW FRAME ADJUSTABLE TUBULAR / PISTOL GRIP FOR 8" - 12"  / 20 CM -30 CM BLADE	12
27	HACKSAW FRAME ADJUSTABLE TUBULAR / PISTOL GRIP FOR 8" - 12"  / 20 CM -30 CM BLADE	23
28	HAMMER BALL PEIN 220 GRAMS / 250 GRAMS / 0.5 LB WITH HANDLE	33
29	CHISEL COLD FLAT 25 MM X 200 MM	56
30	SCREW DRIVER, HEAVY DUTY 300 MM X 12 MM WITH HANDLE	18
31	TAP EXTRACTORS 1/8 TO 1/2 BY 1/16	1
32	EXTRACTORS -SCREW SIZES 1 TO 3	1
33	MALLET CARPENTERS	1
34	ALLEN KEYS 1/16" TO 1/2" X 1/32"	2
35	TOOL MAKER'S BUTTON	2
36	CHISEL, FIRMER (BEVAL) EDGE ) 6 MM. 10,15,20 AND 25 MM. WIDTH X 15 CM LENGTH	2
37	SHAPER TOOL HOLDER TURRET TYPE	12
38	HAMMER SETTING WITH HANDLE	2
39	HAMMER BALL PEIN 500 GRAMS / 450 GRAMS / 1 LB WITH HANDLE	50
40	PIPE WRANCH STILSON PATTERN 6"/150 MM LONG	4
41	SQUARE ENGINEERS 6"/ 15 CM BLADE	28
42	FILE,HALF ROUND 2ND CUT 200 MM	4
43	DRAUGHTSMAN DRAWING INSTRUMENT BOX CONTAINING COMPASSES WITH PANCIL POINT ,POINT DIVIDER,INTERCHANGEABLE,DIVIDER SPRING BOW,PEN SPRING BOW LENDTHENING BAR,PEN DRAWING LINER,SCREW INSTRUMENT, TUBE WITH LEADS.	5
44	CENTRE GAUGE COMBINED. 60 AND 55 DEGREE	1
45	BLOW LAMP 0.5 LITER	1
46	TOOLS KNURLING ,REVOLVING HEAD PAIRS OF WHEELS FOR FINE , MEDIUM, COARSE KNURL WITH 1 SET OF SPARE WHEELS.	2
47	GAUGE FOR GRIDING AND SETTING SCREW CUTTING TOOLS	2
48	SQUARE SMITH'S 45 CM X 30 CM.	2
49	TOOL BIT HOLDER AS ARMSTRONG R.H.	2
50	LEVEL SPIRIT PRECISION METALIC 200 MM	3
51	TOOL BIT HOLDER AS ARMSTRONG STRAIGHT.	4
52	DRAWING BOARD (700X500) IS : 1444- HALF IMPERIAL	66
53	PIPE WRANCH STILSON PATTERN 300 MM LONG	4
54	SCRAPER HALF ROUND 10"/25 CM	10
55	DRILL TWIST (METRIC) 8 MM TO 12 MM BY 1 MM	1
56	MANDRELL 5" X 1/2" , 6" X 3/4"	2
57	COMBINATION DRILL (CENTERING)	8
58	DRILL TWIST (METRIC) 2 MM TO 7 MM BY 1 MM	12
59	SPANNER D.E. FROM 5/8" X 11/16" TO 15/16" X 1" WHITWORTH SIZES	4
60	FULLER TOP AND BOTTEM / 3/8 (PAIR)	2
61	SQUARE FRAMING 24 X 2 X 16 X 1/2	4
62	BENDING SPRING FOR PIPE 1/2"	4
63	WORKING BENCH WITH FOUR TOOL BOXES OF DRAWERS FITTED IN EACH BENCH	32
64	MAGNETIC INDICATOR AND BASE.	1
65	LATHE DOGS 1/2" TO 1/2"	2
66	TRAWELS MASON'S TOOL OF VARIOUS TYPE	1
67	PIPE WRANCH STILSON PATTERN 24" LONG	4
68	SOCKET SET 1/2 DRIVE 3/8 TO 1/2 WITH RATCHET HANDLE	1
69	DRILL TWIST (STRIGHT SHANK) 1/8 TO 1/2 BY 1/64 (SET)	8
70	SAW -SLITTING 3 M, 5 MM, 6 MM, THICK	12
71	SURFACE PLATE 12" X 12" /30 CM X 30 CM	3
72	SOCKETS SET OF MORSE (0-1, 1-2 AND 2-3)	1
73	SPANNER -PIN I TO 3 DIA	2
74	CUTTER SIDE AND FACE DIFFERENT SIZES	4
75	REAMER -H.S.S. HAND 3 TO 12 MM BY 1 MM	2
76	REAMER H.S.S. HAND TAPER PIN 1/2" TO 5/8" BY 1/16"	2
77	LEVEL MASTER PRECISION 15 LONG (EACH DIVISION TO READ 0005 PER FOOT)	2
78	BELT LACER	2
79	METAL RACK 180 X 150 X 45 CM SLOTTED ANGLE	2
80	TABLE WELDING 4' X 2.5' FIRE BRICK TOP ON STAND	2
81	SHAPER INDEXING CENTRES	2
82	METAL RACK 180 X 150 X 45 CM SLOTTED ANGLE	4
83	CARBIDE LATHE TOOLS WITH HOLDER DIFFERENT SHAPES AND SIZES	4
84	CUTTER PLAIN MILLING 65 X 100 X 27 MM BORE	4
85	REAMER H.S.S. MACHINE 3 TO 19 MM IN STEPS OF 1.5 MM	2
86	CAST IRON CAMER BACK STRIGHT EDGES 3 FT. AND 5 FT.	1
87	TAPS AND DIES COMPLATE SET IN BOX B.A.	1
88	REAMEAR H.S.S. MACHINE WITH M.T. SHANK 1/8 TO 3/4 BY 1/16	2
89	TAPS AND DIES COMPLATE SET IN BOX .B.S.W.	1
90	TORQUE WRENCH - BAR TYPE MAX,READING 100 FT. IBS	1
91	MARKING OUT TABLE 90 X 60 X 90 CM	2
92	DRILL TWIST 1/2" TO 3/4" BY 1/16" (MORESE TAPER)	2
93	TAPS AND DIES COMPLATE SET IN BOX METRIC	2
94	ANVIL STAND	2
95	CUTTER EQUAL ANGLE 45,60,90,80 BITH R.H.MILLING SLOT CUTTER 6 MM, 10 MM, 20 MM THICK	4
96	TAPS AND DIES COMPLATE SET IN BOX,B.S.F.	2
97	TAPS AND DIES COMPLATE SET IN BOX AMERICAN	2
98	DRILLS STRAIGHT SHANK WIRE GUAGE SIZE 1 TO 60 WITH GUAGE	2
99	CHUCK -SELF CENTERING 5/125 MM	2
100	10 JAW CHUCK INDEPENDENT	4
101	R.P.M. INDICATOR.	2
102	BLOCK -'VEE 3" X 1/2" (PAIR) WITH CLAMPS	3
103	VISCOMETER	7
104	VICE BENCH 120 / 125 MM JAWS	10
105	DRILLS STRAIGHT SHANK LETTER GUAGE SIZES A TO Z WITH GUAGE	2
106	DIE SET PIPE COMPLETE WITH DIE STOCK & BUSHING FOR PIPS FROM 1/8" TO 1"DIA	1
107	SWAGE BLOCK 14 X 14 5 WITH STAND	1
108	LOGARITHMIC SLIDE RULE MADE BY FABER, GERMANY	1
109	COMBINATION SET 300 MM RULE (COMPLETE SET)	2
110	FORGE -LIGHT GENERAL PURPOSE PORTABLE WITH CHIMNEY AND TROUGH FITTED WITH BLOWER	2
111	MICRO METER INSIDE 50-200 MM WITH EXTENSION ROD	2
112	CUTTER EQUAL ANGLE 45,60,70	4
113	GRINDER DOUBLE ENDED BENCH 7"/175 MM WHEELS HIGH REVOLUTIONS MOTORISED.	1
114	PUMP-GEAR	1
115	LOBE BLOWER FOR FILTER PRESS	1
116	MICROMETER OUTSIDE 0 TO 25 MM READING 0.01 MM	2
117	DIAL TEST INDICATOR 0.1 MM ON STAND.	2
118	SET OF MODELS,GEOMETRICAL AND SAMPLES OF MACHINERY PARTS AS NECESSARY OF METAL, WOOD AND PLASTIC	2
119	WORKING BENCH 1800 X 800 X 900MM	4
120	SURFACE PLATE 24" X 24" / 60 CM X 60 CM	2
121	PRESS - BAR STRAUGHTENING	1
122	FLOOT CRANE 35 CWT . CAP	2
123	REYNOLDS EXPERIMENT EQUIPMENT	1
124	DRILLING MACHINE BENCH SENSITIVE 0-12 MM CAP MOTORISED WITH CHUCK AND KEY.	2
125	CHUCKS - BASE FOR SLOTTER	1
126	TRAY DRIER	1
127	RULE STEEL 15 CM GRADUATED BOTH ENGLISH AND METRIC UNITS	41
128	SQUARE TRY HARDENED BLADE 4"/10 CM.	69
129	CALIPER OUTSIDE SPRING 6" / 15 CM	58
130	CALIPER INSIDE SPRING 6" / 15 CM	15
131	CALIPER HERMACHRODITE.SPRING 15 CM	70
132	DIVIDER SPRING 6" / 15 CM	40
133	SCRIBER 150 MM (KNURLED CENTER POSITION)	39
134	PUNCH CENTRE 4" / 100 MM LONG X 10 MM DIA -KNURLED BODY	31
135	SCREW DRIVER INSULATED 6"/150 MM	50
136	CHISEL COLD 10.X100MM	90
137	HAMMER BALL PEIN 500 GRAMS / 450 GRAMS / 1 LB WITH HANDLE	92
138	HAMMER BALL PEIN 220 GRAMS / 250 GRAMS / 0.5 LB WITH HANDLE	89
139	FILE FLAT 2ND CUT 250 MM	53
140	FILE FLAT SMOOTH 250 MM	15
141	FILE HALF ROUND 2ND CUT 150 MM	33
142	HACKSAW FRAME ADJUSTABLE TUBULAR / PISTOL GRIP FOR 8" - 12"  / 20 CM -30 CM BLADE	44
143	GOGGLES (FIBER OR PLASTIC CUP) SAFETY GLASSES (INTERCHANGEABLE CLEAR GLASSES).	54
144	PUNCH DOT SLOT . DIA 10 X 100 MM	33
145	RULE STEEL 60 CM GRADUATED BOTH IN ENGLISH AND METRIC UNITS.	2
146	SURFACE PLATE 45 CM X 45 CM.	5
147	MARKING TABLE/ SURFACE PLATE TABLE 900 X 900 X 1200 MM -METAL	5
148	UNIVERSAL SCRIBING BLOCK 220/225/250 MM. PILLAR.	1
149	BLOCK-VEE PAIR 7 CM AND 15 CM WITH CLAMPS.	5
150	ANGLE PLATE 100 X 200 MM	2
151	LEVEL MASTER PRECISION 15 LONG (EACH DIVISION TO READ 0005 PER FOOT)	2
152	PUNCH ROUND 3 MM AND 4 MM SET OF 2.	4
153	DRILL MACHINE ELECTRIC PORTABLE 6 MM CAPACITY	1
154	DRILL TWIST S/S 8 MM TO 15 MM BY 1/2 MM	4
155	TAPS AND DIES COMPLATE SET IN BOX B.A.	4
156	TAPS AND DIES COMPLETE SET IN BOX WHIT-WORTH.	3
157	TAPS AND DIES COMPLATE SET IN BOX METRIC	1
158	FILE KNIFE EDGE SMOOTH.15O MM	1
159	FILE FEATHER EDGE SMOOTH.150 MM	2
160	FILE TRIANGULAR 2ND CUT 200 MM	19
161	FILE HALF ROUND 2ND CUT 250 MM	8
162	CARD FILE (STEEL WIRE BRUSH ) 50 X 150 MM	20
163	STONE, CARBORANDUM 15 X 5 X 3.75 CM ROUGH AND SMOOTH	12
164	STONE, CARBORANDUM 15 X 5 X 3.75 CM ROUGH AND SMOOTH	8
165	OIL CANE 0.25 LITRES.	3
166	BLOW LAMP 0.5 LITER	3
167	SPANNER WITH-WORTH D.E. 6 MM. TO 25 MM SET OF 8 PCS	27
168	INTERCHANGEABLE RATCHET SOCKET SET WITH A 12 MM DRIVER-SOCKET RANGE 4 MM SET OF 8	4
169	SPANNER -BOX SET IN MM 3X4, 6X7,9X11,12X14,15X19,22X25,SET OF 6	2
170	GLASS MAGNIFYING 75 MM DIA	3
171	CLAMP TOOL MAKER 5 CM AND 7.5CM SET OF 2.	4
172	C-CLAMP 50 MM	2
173	REAMER ADJUSTABLE MAX.9MM ,12 MM,19MM-SET OF 3.	5
174	REAMER TAPER FOR MM TO 9 MM SET OF 4.	5
175	REAMER PARALLEL 6 MM TO 12 MM SET OF 5.	5
176	SCRAPER FLAT 12 MM X 150 MM.	10
177	SCRAPER 3 CORNER 15 CM.	10
178	SCRAPER HALF ROUND 15 CM.	6
179	CHISEL COLD CROSS 9 MM X 3 MM	3
180	EXTRACTOR STUD EZY-OUT.	2
181	COMBINATION SET 300 MM RULE (COMPLETE SET)	7
182	MICROMETER OUTSIDE 25 TO 50 MM READING 0.01 MM	15
183	MICROMETER OUTSIDE 0 TO 25 MM READING 0.01 MM	16
184	MICROMETER OUTSIDE 50 TO 75 MM READING 0.01 MM	10
185	MICROMETER IN SDIE 25 MM TO 50 MM WITH EXTENSION RODS.	4
186	VERNIER BEVEL PROTRACTOR WITH 150 MM BLADE	3
187	SCREW PITCH GAUGE FOR METRIC PITCHES ( 0.25-6 MM )	3
188	DRILL TWIST TAPPER SHANK 6MM TO 25 MM  BY1.5 MM.	5
189	PIPE WRANCH STILSON PATTERN 300 MM LONG	2
190	DIE FOR PIPE ADJUSTABLE 0--20.5 CM CAP.	1
191	GRINDING WHEEL DRESSER (DIAMOND)	3
192	VICE -MACHINE SWIVELLING BASE 6" / 150 MM JAW X 100 MM OPENING	2
193	VICE LEG 10 CM JAW.	3
194	WORKING BENCH 240/250 X 120 X 60 CM.	12
195	STEEL CUPBOARD / STEEL ALMIRAH/CABINET 1800 MM	1
196	LOCKERS WITH 6 DRAWERS (STANDARD SIZE).	3
197	METAL RACK 180 X 150 X 45 CM SLOTTED ANGLE	4
198	STEEL CHAIR FOR STAFF/OFFICE	1
199	BLACK BOARD WITH EASEL	2
200	FIRE EXTINGUISHER SODA ACID / FOAM TYPE 7 LTR CAP.	3
201	FIRE BUCKETS  (4 BUCKETS) WITH STAND	4
202	VICE -MACHINES .SWIVEL BASED-100 MM	8
203	WING CAMPASS 300MM	6
204	TONGS ROUND.-450 MM LONG	1
205	TONG FLAT.450 MM LONG	3
206	SQUARE SMITH'S 45 CM X 30 CM.	1
207	COLD SET RODDED.19 MM X 450 MM	4
208	HOT SET RODDED.19 MM X 450 MM	2
209	SWAGES TOP & BOTTOM 12 MM/19 MM, 25 MM (PAIR).	2
210	FLATTERS {RODDED) 55 MM SQUARE.	3
211	FULLER TOP & BOTTOM 6 MM,9 MM (PAIR).	8
212	ANVIL 50 KGS WITH STAND	7
213	ANVIL STAND	6
214	SHOVEL.600 MM WITH HANDLE	3
215	TRAMMEL.WITH 200 MM BEAM	1
216	RAKE FOR SMITHY WORK 600 MM	3
217	QUENCHING TANK.(TO MADE IN INSTITUTE) 600 X 600 X 600 MM	5
218	POKER - 900 MM LONG	6
219	HARDIE.50 MM	6
220	PUNCH PRICK 6" / 15 CM	4
221	MALLET HARD WOOD 0.50 KG.	2
222	SNIP STRAIGHT 250 MM	5
223	HAMMER SETTING WITH HANDLE	1
224	HAMMER PLANISHING WITH HANDLE	2
225	SNIP BENT 250 MM	4
226	STAKE HATCHET.	4
227	STAKE GROOVING.	4
228	GAUGE -IMPERIAL SHEET.	4
229	GAUGE - SLIP METRIC SET(112 PIECES IN A BOX)	4
230	CARBIDE WEAR BLOCK 1 MM-2 MM.	4
231	GAUGE -SNAP GO AND NO GO 25 TO 50 MM BY 5 MM.	5
232	GAUGE PLUG SINGLE 3 ENDED 5 TO 55 BY 1 MM.	5
233	TELESCOPIC GAUGES1/2" - 6" (12 MM-150 MM)	5
234	DIAL TEST INDICATOR 0.1 MM ON STAND.	3
235	SINE BAR 125 MM.	4
236	TOOLS BITS HSS 10 MM SQUARE	10
237	LATHE TOOLS BIT 6 MM * 75 MM.	60
238	LATHE TOOLS BIT 7 MM * 75 MM.	60
239	LATHE TOOLS BIT 9 MM * 85 MM.	60
240	TOOL BIT HOLDER AS ARMSTRONG R.H.	8
241	TOOL BIT HOLDER AS ARMSTRONG L.H.	10
242	TOOL BIT HOLDER AS ARMSTRONG STRAIGHT.	10
243	PLIER WATER PUMP 250 MM	9
244	CUTTER PIPE 6MM TO 50 MM WHEEL TYPE.	3
245	PIPE BENDER SPOOL TYPE WITH STAND MANUALLY OPERATED.	9
246	SPANNER ADJUSTABLE 375 / 380 MM IS : 1649.	1
247	VERNIER CALIPER - DIAL 0-130 MM L.C.M. 0.05 MM. (UNIVERSAL TYPE).	1
248	MICROMETER -SCREW THREAD WITH INTERCHANGEABLE 0.4-1.75 MM. PITCH ANVILS FOR CHECKING METRIC THREADS .	5
249	MICROMETER-DEPTH 0-100 MM 0.01 MM.	5
250	VERNIER CALIPER WITH THUMB BLOCK 0-130 MM L.C.O. 0.2 MM.	5
251	COMPARATOR STAND WITH DIAL INDICATOR.	5
252	SQUARE ENGINEERS 6"/ 15 CM BLADE	1
253	SURFACE ROUGHNESS COMPARISON PLATES "RUBERTS".	3
254	DRILLING MACHINE PILLAR SENSITIVE 0-20 MM CAP WITH SWIVEL TABLE MOTORISED WITH CHUCK & KEY.	3
255	DRILLING MACHINE BENCH SENSITIVE 0-12 MM CAP MOTORISED WITH CHUCK AND KEY.	3
256	FORGE -PORTABLE HAND BLOWER 38 CM TO 45 CM.	4
257	GRINDING MACHINE (GENERAL PURPOSE) D.E. PEDESTAL WITH 20 CM DIA. WHEELS ROUGH AND SMOOTH WITH TWIST DRILL GRINDING ATTACHMENT.	3
258	FURNACE ELECTRONIC WITH CAPACITY 600 0C TO 1400 0C.	5